TURCK Flame Rated Cables - See the Difference!

Each of TURCK's Connectivity product lines offer an option with UL and CSA listed cables that are FT4 flame retardant. FT4 is a large scale flame test where cable is bundled into a specified flammable mass and suspended vertically in a flame chamber. Flame is applied using a 10" ribbon burner at 70,000 BTU's for 20 minutes. The cable char must not exceed 1.5 meters. This contrasts with UL and CSA AWM recognized only cables where small scale flame test may be as limited as one 30 second horizontal flame application at 1,700 BTU's from a Tirrell burner.

Check out TURCK's video "Flame Rated Cable vs. Non-Flame Rated Cable". The video provides a simple yet powerful demonstration of why it is essential to use flame rated cable from TURCK in applications where cable may be near or come into contact with flames.

TURCK's Powerfast Connectivity for Process Automation

TURCK expands its powerfast line of connectivity products to include a full line of solutions for process automation applications. Designed to replace expensive, time-consuming hard-wiring methods, powerfast for process automation provides a robust and reliable modular wiring solution. A full line of cordsets, receptacles, reducers, reducer tees, and power lokfast devices provides users with the ability to configure a complete power distribution system.

TURCK's powerfast process automation connectivity products are UL approved and available in A-Size (7/8") and D-Size (1-3/8") connectors and are rated for up to 30 Amps of power for a wide range of operation. Additionally TURCK process automation powerfast products carry FM approval for use in class 1 division 2 hazardous locations. Offering easy installation and customization, the powerfast system delivers flexible design capabilities, quick modifications and expandable options.

"We created the process powerfast line in response to customer requests that were looking for a modular power solution for their process applications" explained Jay Bartsias, Senior Product Manager for TURCK's connectivity division. "Now, we can offer our process customers the same convenient solution that was previously only available for factory automation applications."

The A-Size powerfast for process automation solution is IP67 rated and the D-Size solution is IP67, 68 and 69k rated. Both product lines are NEMA 1, 3, 4 and 6P rated with temperature rating up to 90 degrees Celsius.

Benefits:

• Replaces time consuming hard-wiring methods
• Quick-disconnect connectivity reduces installation time
• Rugged, robust connector and housing
• Provides modular power solution for process automation applications
• Delivers flexible design capabilities, quick modifications and expandable options

Stainless Steel Junction Box for Harsh Process Environments

TURCK Stainless Steel Junction Box Connects Up to 

Eight Signals in Harsh Process Environments

TURCK introduces its new stainless steel process junction box. With the ability to consolidate up to eight individual, localized analog or discrete signals into a single device, this junction box streamlines connectivity requirements. For greater simplicity, the signals are then routed to a control unit through a single homerun cable.

In addition to simplifying connectivity, TURCK stainless steel process junction boxes provide a robust connectivity solution in harsh environments such as oil and gas exploration, off-shore drilling platforms and pharmaceutical plants. The junction boxes feature FM approval for Class 1, Division 2, Groups A, B, C and D hazardous locations, and ingress protection of IP67 including the junction boxes receptacles as long as the ports are covered/connected. Additionally, TURCK stainless steel process junction boxes have cast 316 stainless steel electropolished housing ensuring optimal performance in areas that present severe environmental conditions including water, salt spray, gases and other corrosive materials.

"The new stainless steel process junction boxes take our connectivity capabilities to a whole new level," said Jeff Schoenberg, Connectivity Product Manager, TURCK. "With a robust design and enhanced connection capabilities for multiple signals, our customers can achieve the performance and compatibility required for harsh process automation environments."

TURCK stainless steel junction boxes utilize TURCK minifast (7/8”) or eurofast (M12) port connectors and include a multifast (M23) homerun connector.